If the trailer bracket holes are not aligning, switch the left and right brackets and rotate them so the silver release buttons point toward the rear wheels. This will allow the holes to align properly during installation.
- Place the reducing sleeve over the holes on the front of the trailer frame.
- Position the bracket over the sleeve (tabs facing rear), aligning all holes.
- Secure with two 4mm hex bolts and two 11mm nuts. Tighten securely.
- Repeat on the opposite side (no reducing sleeve needed for the left bracket).
- Insert each stroller wheel into the bracket.
If you need some more assistance, feel free to reach out. We're happy to help!